 |
| Quantity: | |
|---|---|
VP101
Viecar
VP101 is an auto code reader and diagnostic scan tool with the following features:
1. Supports nine standard protocols of OBD II / Eobd;
2. With vehicle fault diagnosis, real-time data flow and other OBD functions;
3. Supports functions of data waveform display, data storage and playback;
4. Supports emission test data;
5. High resolution display with 2.8-inch TFT LCD color screen;
6. Good reliability, with wide power supply voltage range of 8 ~ 36V. With stronger over-current and over-voltage protection function;
7, Discharge test data;
8, Sectional interface is compatible with more car models.
9, The EOBD scan tool is with type-C interface. The type-C interface has two functions: A, connect to printer to print the diagnostic data;
B, connect to computer and upgrade software of the diagnostic scan tool.
10, The vehicle scan tool support eight languages. And there are two version for choices.
A. English, Russian, Italian, French, German, Spanish, Portuguese, Polish
B. English, Russian, Italian, French, German, Spanish, Portuguese, Chinese
1, Read Codes : Read diagnostic trouble code
2, Erase codes: Eliminate the trouble code the turn off the check engine light
3, Check I/M Readiness: Emission status
4, Display Data Stream: Real time vehicle data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System Status
- Fuel Pressure
- Fuel consumption monitoring, etc.
Note: The supported data of the handheld scan tool is relative with vehicle model. Some car model may not support some listed data.
5, Check Freeze Frame: the data when trouble accrued.
6, Voltage Test: voltage of vehicle battery.
7, Check Vehicle Information: Vin code, CID, CVN and so on.
8, Print diagnostic data.
Part Number | VP101 |
Communication way | OBD Cable |
Compatible OS | Windows |
Master Chip | STM32F103VET6 |
Communication Protocols (compatible with more than 95% vehicles equipped with OBD-II protocols) | 1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) |
Applicable voltage | 8-36V |
Working current | 60mA |
Standby current | 48mA |
Working temperature | -20℃~65℃ |
Storage temperature | -40℃~80℃ |
Product dimension | 154.5mm*85mm*24mm |
OBD cable length | 75cm |
Color | Black/Orange |
Note: The vehicle scan tool is not compatible with new energy vehicles, hybrid vehicles, and diesel vehicles. It also cannot work with OBD-II vehicle which does not support the list OBD-II protocols.
VP101 is an auto code reader and diagnostic scan tool with the following features:
1. Supports nine standard protocols of OBD II / Eobd;
2. With vehicle fault diagnosis, real-time data flow and other OBD functions;
3. Supports functions of data waveform display, data storage and playback;
4. Supports emission test data;
5. High resolution display with 2.8-inch TFT LCD color screen;
6. Good reliability, with wide power supply voltage range of 8 ~ 36V. With stronger over-current and over-voltage protection function;
7, Discharge test data;
8, Sectional interface is compatible with more car models.
9, The EOBD scan tool is with type-C interface. The type-C interface has two functions: A, connect to printer to print the diagnostic data;
B, connect to computer and upgrade software of the diagnostic scan tool.
10, The vehicle scan tool support eight languages. And there are two version for choices.
A. English, Russian, Italian, French, German, Spanish, Portuguese, Polish
B. English, Russian, Italian, French, German, Spanish, Portuguese, Chinese
1, Read Codes : Read diagnostic trouble code
2, Erase codes: Eliminate the trouble code the turn off the check engine light
3, Check I/M Readiness: Emission status
4, Display Data Stream: Real time vehicle data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System Status
- Fuel Pressure
- Fuel consumption monitoring, etc.
Note: The supported data of the handheld scan tool is relative with vehicle model. Some car model may not support some listed data.
5, Check Freeze Frame: the data when trouble accrued.
6, Voltage Test: voltage of vehicle battery.
7, Check Vehicle Information: Vin code, CID, CVN and so on.
8, Print diagnostic data.
Part Number | VP101 |
Communication way | OBD Cable |
Compatible OS | Windows |
Master Chip | STM32F103VET6 |
Communication Protocols (compatible with more than 95% vehicles equipped with OBD-II protocols) | 1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) |
Applicable voltage | 8-36V |
Working current | 60mA |
Standby current | 48mA |
Working temperature | -20℃~65℃ |
Storage temperature | -40℃~80℃ |
Product dimension | 154.5mm*85mm*24mm |
OBD cable length | 75cm |
Color | Black/Orange |
Note: The vehicle scan tool is not compatible with new energy vehicles, hybrid vehicles, and diesel vehicles. It also cannot work with OBD-II vehicle which does not support the list OBD-II protocols.
