1, Please confirm pin assignment before order. Pin assignment is very important for an automotive diagnostic cable. If it is with wrong pin out, it will not work.
2, Please require drawing or specification for confirmation. This is a good way to confirm details of the automotive diagnostic cable. This procedure will avoid the error caused by the product specifications.
3, Connector shape of the auto diagnostic cable is also very important. Just know it is female or male can not ensure it can match with other device. There are many different connector shape in the market. Though they are with same pin number, but the shape may not match.
4, There are type A and type B OBD-II connector. Type A OBD2 connector is with one narrow gap, but type B is with two separate gaps. Type A is for 12V and type B is for 24V vehicles. So in order to avoid compatibility problem and broken by wrong voltage, please confirm connector type for the obd diagnostic cable.
5, As for wire specification of automobile diagnostic cable, it is not the bigger the better. Big wire is with better physical strength and lower resistance. But nowadays, performance of the wire has been improved and as for short automotive diagnostic cable, the wire will not bring much difference. But big wire will increase cost for the auto diagnostic cable and shipping cost.
6, If you need customized obd2 diagnostic cable, MOQ is always required. Generally we do not accept customized features for small order.
7, As for automobile diagnostic cable requires new mold, it always take about one moth to develop the mold, then take several days to test the mold and make new sample. So please allow enough time for new development auto diagnostic cable.
Product Number | FA-DC-MB26 |
Connector 1 | OBD-II Female |
Connector 2 | BENZ 38Pin Male |
Supported vehicle | Mercedes-Benz vehicles |
Operating voltage | 9~16V DC |
Color | Black |
Cable length | Upon order |
Injection material | PA66 or customized |
Sheath Material | PVC |
Wire gauge | 18~26AWG (OD1.02~0.404mm) |
Contact parts material | Plated copper or brass |
Cable shape | Round |
Contact Resistance | 3 Ohm maximum |
Insulation Resistance | 5M Ohm minimum |
Working Temperature | −25℃ ~ +85℃ |
OEM and ODM | Available based on MOQ |
Port 1 OBD-II Female | Port 2 BENZ 38Pin Male |
4+5 | 1 |
7 | 4 |
16 | 3 |
Note: The default pin out is for reference only. Fiberall accept customized pin assignment for the BENZ diagnostic cable.
1, Acceptable trade term: FOB Shenzhen, EXW, CIF, CFR
2, Payment term: L/C, T/T
3, Transportation way: International courier, by air, by sea
4, Certificate: UL for raw material, RoHS for material or finished auto diagnostic cable. Other certificate like CE, certificate of origin is upon negotiated.
5, Delivery time: about 3-5 days for DHL, UPS, FedEx and airline. As for ocean transportation, it is always much longer, depends on destination port, vessel department time etc.
content is empty!
3F, Block A1, Puhua High-Tech Park, Dalang, Longhua District, Shenzhen, Guangdong, China
+86 13418549260
+86 13418549260
live:.cid.6602b7a62aa148a2
Copyright © 2022 Fiberall Co., Ltd
OBD2 Code Reader OEM ODM Factory