Part number | FA-DC-OC80 |
Port one | OBD2 16pin |
Port two | OBD-II 16pin pass through connector |
Power Voltage | 12V or 24V |
Wire Spec | 26AWG |
Environment temperature | -20~80°C |
Pinout | 16 pin full connected |
Color | Black |
Connector material | PA66+GF (ABS+PC) |
Default length | 3ft or customized |
Packing material | PE bag/Carton |
Cable spec | Cable Diameter 2.1x16mm (16pin: 16Cx28AWG) |
Most of Fiberall OBD2 diagnostic and conversion cable are with J1962 connector. So what’s J1962? It is a connector standard defined by Society of Automotive Engineers (SAE), so J1962 is also mentioned as SAE J1962. Shape and pin number of the obd connector are defined by SAE. The J1962 OBD-II connector is with 16 pins (2x8 in two rows) and the shape is trapezoid.
SAE even gave definition for each pin of the OBD-II connector. For example, pin 2 is for bus positive line and pin 10 for bus negative line, pin 4 is for chassis ground, pin 5 is for signal ground, pin 6 is for CAN high and pin 14 for CAN low, pin 7 for K line and pin 15 for L line, and other pins are reserved for vehicle manufacturer's discretion. So we always request buyer to confirm the pinout diagram for the obdii diagnostic cable in order to avoid mistake.
Not only that, SAE also suggested depth for the location of the OBD2 interface. A ideal OBD-II connector should be within 2 feet (0.61 m) of the steering wheel. The benefit of this requirement is convenient connection with the obd diagnostic cable. But in practice, exemption is very common and OBD-II socket is not located under the steering wheel. Manufacturer locate it above the clutch, brake, accelerator; or below ashtray, front passenger compartment; near or inside the central armrest box and so on. When is it necessary to use the obd2 conversion cable, user can check these position according to different vehicle model.
1, Shipping label on the carton is with buyer’s order number, part number, qty and weight information etc.
2, Materials of both J1962 connector and obd cable comply with RoHS and UL requirements.
3, 12 months warranty;
4, Customized order is welcome;
5, Mold development is available.
6, Various wire specification and pin definition for options;
7, Complete supply chain with obdii cable, obd-ii adapter and obd2 connector.
content is empty!
3F, Block A1, Puhua High-Tech Park, Dalang, Longhua District, Shenzhen, Guangdong, China
+86 13418549260
+86 13418549260
live:.cid.6602b7a62aa148a2
Copyright © 2022 Fiberall Co., Ltd
OBD2 Code Reader OEM ODM Factory