1, The obd cable is with standard J1962 connector. It is universal for international wide.
2, We only use brand new material which is RoHS and UL compliant and earth friendly.
3, Each cable should pass test before shipping.
4, We are with over ten year’s production experience in this filed. We are with advanced equipment, mature technique and skilled staff.
5, Factory direct deal. It is easy to communicate, easy to control cost and ensure lead time.
6, Other than standard specification, we also provide customized features for the obd2 cable. Like color, length, pin assignment, wire specification, material and so on.
7, Drawing or specification with pin diagram is available for confirmation before production. Sample is also available upon real situation.
Part No. | FA-DC-OC48 |
Port one | OBD2 male (Type A) |
Port two | OBDII female |
Application | OBD-II complaint vehicles, OBD2 scanner, GPS system, IOV and so on |
Compatible voltage | DC 12V |
Contact parts | Silver-plated, gold-plated or nickel-plated copper or brass |
Jacket Material | PVC or PUR |
Plastic part of connector | PA66, ABS or PC, customizable |
Cable shape | Round |
Wire spec | AWG 26~18, pure copper |
Pin out | Standard or customized |
Obd cable length | Customized |
Contact Resistance | <3 Ohm |
Insulation Resistance | >5M Ohm |
Environment Temperature | −25℃ ~ +85℃ |
Plastic is an important part of automotive OBD cable. Plastic not only for insulation, but also form and protect the automotive OBD2 cable. Here we will introduce several common plastics.
1. Nylon polymide (PA): This is the most common plastic used in automotive OBD cable. It has good toughness, wear resistance and no smell. It also has strong plasticity, suitable for drilling, cutting, planning and injection molding. Its heat resistance can reach 105 ℃.
2. Polyester polyester (PBT): We always use it as insulation for conductor of automotive OBD cable. It has excellent chemical and electrical properties, as well as size stability and good plasticity. It also has creep resistance and its heat resistance can reach 120 ℃.
3. Acrylic / butadiene / styrene copolymer (ABS). It is always used as alternative injection molding material for over-molded part of automotive OBD cable. It has good mechanical properties and good chemical resistance. It is easy to process and cheaper than nylon, that’s why it can be substitute of nylon. But its heat resistance is worse than nylon, which can only reach 60 ℃.
4. Polycarbonate polycarbonate (PC). It is mainly for connector of automobile OBD cable. It has good wear resistance, good molding property and good insulation performance. Moreover, it has good dimensional stability, poor solvent resistance and low water absorption. Its heat resistance can reach 130 ℃.
5. Polyvinyl chloride (PVC). This is the most common outer jacket material for automotive OBD cable. It has good physical properties, good extrusion properties, good weather resistance, and with low moisture absorption. Its heat resistance can reach 60 ℃.
6. Polyurethane polyurethane (PUR). It is with good bending property, fatigue resistance, and excellent tear strength. Therefore, it is also a common material for outer jacket of obd cable which requires good softness.
content is empty!
3F, Block A1, Puhua High-Tech Park, Dalang, Longhua District, Shenzhen, Guangdong, China
+86 13418549260
+86 13418549260
live:.cid.6602b7a62aa148a2
Copyright © 2022 Fiberall Co., Ltd
OBD2 Code Reader OEM ODM Factory