 |
| Quantity: | |
|---|---|
FA-DC-OC46
Fiberall
Part number | FA-DC-OC46 |
Port one | OBD-II male (Type A) |
Port two | OBD2 female |
Port three | OBDii female |
Compatible vehicle | OBD-II models |
Supported voltage | 12V DC |
Contact parts OBD2 male connector | Nickel-plated or gold-plated copper |
Material of jacket | PVC |
Cable shape | Round |
Wire specification | 18~26 AWG, pure copper |
Over-molded part of connectors | PA66 or customized |
Pin definition | Standard or customized |
Obd cable length | As order |
Contact Resistance | 3 Ohm Max. |
Insulation Resistance | 5M Ohm Min. |
Temperature range | −25℃ ~ +85℃ |
No. | Part Number | Descriptions |
1 | FA-DC-IOV02 | Y Type OBD-II Splitter Cable For Internet of Vehicles |
2 | FA-DC-IOV03 | OBD Cable Y Splitter For Internet of Vehicles |
3 | FA-DC-IOV04 | OBD2 Splitter Cable For Internet of Vehicles |
4 | FA-DC-OC06 | 3.0 Housing To OBD Female & Male Diagnostic Splitter Cable |
5 | FA-DC-OC46 | Vehicle OBD Splitter Cable with J1962 OBD-II Connector |
6 | FA-DC-OC81 | J1962 Male to Straight 16Pin OBDII Diagnostic Splitter Cable |
7 | FA-DC-OC83 | Right Angle OBD Car Diagnostic Splitter Cable |
Fiberall is with over 10 years production experience in all kinds obd cable, auto diagnostic cable and truck extension cable. We also have rich ODM and OEM experience for these cables. So what customized features can we provide?
1, Connector type: We are able to make the obd cable with various connector. As for OBD-ii connector, we provide female or male, type A or type B for options. We also provide obd connector with special shape or design. Other connector like DB, lighter, J1939, 3.0 housing and so on are available for the obd cable.
2, Structure of the obd cable: We provide straight through cable with one connector at both ends. And we also provide splitter obd cable with two or even three connectors at one end. Open end is also available.
3, Color of the obd cable: there are three parts. 1, color of the connector, some type of connector has two parts, interface part and over-molded part. 2, jacket color of obd cable, refers to the cover sheath outside the wires. 3, color of wire, refers to the protective layer or isolator of wire.
4, Length of the obd cable.
5, Accessories or integrated components for the obd cable. Like mounting hole, screw, fuse, resistor, LED light, splitter, protection tube etc.
6, Mold development: It is mainly for connector of the obd cable. If user require change or new design, there is problem for us to develop new mold. And user can appoint pattern, logo and words on the connector.
7, Material of the obd cable. Including plastic for connector and jacket, metal for wire, pin and other contact parts and so on.
8, Other customized features like label, packing, pin definition for obd cable are also available.
Part number | FA-DC-OC46 |
Port one | OBD-II male (Type A) |
Port two | OBD2 female |
Port three | OBDii female |
Compatible vehicle | OBD-II models |
Supported voltage | 12V DC |
Contact parts OBD2 male connector | Nickel-plated or gold-plated copper |
Material of jacket | PVC |
Cable shape | Round |
Wire specification | 18~26 AWG, pure copper |
Over-molded part of connectors | PA66 or customized |
Pin definition | Standard or customized |
Obd cable length | As order |
Contact Resistance | 3 Ohm Max. |
Insulation Resistance | 5M Ohm Min. |
Temperature range | −25℃ ~ +85℃ |
No. | Part Number | Descriptions |
1 | FA-DC-IOV02 | Y Type OBD-II Splitter Cable For Internet of Vehicles |
2 | FA-DC-IOV03 | OBD Cable Y Splitter For Internet of Vehicles |
3 | FA-DC-IOV04 | OBD2 Splitter Cable For Internet of Vehicles |
4 | FA-DC-OC06 | 3.0 Housing To OBD Female & Male Diagnostic Splitter Cable |
5 | FA-DC-OC46 | Vehicle OBD Splitter Cable with J1962 OBD-II Connector |
6 | FA-DC-OC81 | J1962 Male to Straight 16Pin OBDII Diagnostic Splitter Cable |
7 | FA-DC-OC83 | Right Angle OBD Car Diagnostic Splitter Cable |
Fiberall is with over 10 years production experience in all kinds obd cable, auto diagnostic cable and truck extension cable. We also have rich ODM and OEM experience for these cables. So what customized features can we provide?
1, Connector type: We are able to make the obd cable with various connector. As for OBD-ii connector, we provide female or male, type A or type B for options. We also provide obd connector with special shape or design. Other connector like DB, lighter, J1939, 3.0 housing and so on are available for the obd cable.
2, Structure of the obd cable: We provide straight through cable with one connector at both ends. And we also provide splitter obd cable with two or even three connectors at one end. Open end is also available.
3, Color of the obd cable: there are three parts. 1, color of the connector, some type of connector has two parts, interface part and over-molded part. 2, jacket color of obd cable, refers to the cover sheath outside the wires. 3, color of wire, refers to the protective layer or isolator of wire.
4, Length of the obd cable.
5, Accessories or integrated components for the obd cable. Like mounting hole, screw, fuse, resistor, LED light, splitter, protection tube etc.
6, Mold development: It is mainly for connector of the obd cable. If user require change or new design, there is problem for us to develop new mold. And user can appoint pattern, logo and words on the connector.
7, Material of the obd cable. Including plastic for connector and jacket, metal for wire, pin and other contact parts and so on.
8, Other customized features like label, packing, pin definition for obd cable are also available.
