Availability: | |
---|---|
Quantity: | |
V07HU
Fiberall
1, Fast diagnosis;
2, Use with computer, safe and stable;
3, With RS232 interface (USB), anti-interference;
4, Intelligent FT232 Chip;
5, Universal for most car model;
6, With more stable performance;
7, Lower energy consumption;
8, Certificate: CE, FCC, RoHS;
9, Support 99% OBD-II vehicles;
10, Equipped with imported PIC18F25K80;
11, Do not need to install driver.
Part number | V07HU |
Compatible Operation System | Windows or MAC |
Communication way | OBD-II/USB/RS232 interface/cable |
Master chip | PIC18F25K80 |
Working voltage | 9V-16V |
Operating current | 65mA |
Standby current | 20mA |
Working temperature | -40℃~85℃ |
Working humidity | ≤ 60% |
Color | Black |
Compatible App | ScanMaster-ELM |
1.SAE J1850 PWM (41.6Kbaud)
2.SAE J1850 VPW (10.4Kbaud)
3.ISO9141-2(5 baud init, 10.4Kbaud)
4.ISO14230-4 KWP (5 baud init,10.4Kbaud)
5.ISO14230-4 KWP (fast init, 10.4 Kbaud)
6.ISO15765-4 CAN (11bit ID, 500 Kbaud)
7.ISO15765-4 CAN (29bit ID, 500 Kbaud)
8.ISO15765-4 CAN (11bit ID, 250 Kbaud)
9.ISO15765-4 CAN (29bit ID, 250 Kbaud)
1, Read engine fault codes, both generic and manufacturer-specific, and display their meaning.
2, Clear trouble codes and turn off the MIL ("Check Engine" light).
3, Display current sensor data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel Pressure and so on.
No | Pin Definition | Remark |
1 | B+ | Battery 12V output |
2 | VCC_5V | VCC_5V power supply |
3 | RxD | Signal Receiving |
4 | TxD | Signal Sending |
5 | GND | Earth wire |
1, Fast diagnosis;
2, Use with computer, safe and stable;
3, With RS232 interface (USB), anti-interference;
4, Intelligent FT232 Chip;
5, Universal for most car model;
6, With more stable performance;
7, Lower energy consumption;
8, Certificate: CE, FCC, RoHS;
9, Support 99% OBD-II vehicles;
10, Equipped with imported PIC18F25K80;
11, Do not need to install driver.
Part number | V07HU |
Compatible Operation System | Windows or MAC |
Communication way | OBD-II/USB/RS232 interface/cable |
Master chip | PIC18F25K80 |
Working voltage | 9V-16V |
Operating current | 65mA |
Standby current | 20mA |
Working temperature | -40℃~85℃ |
Working humidity | ≤ 60% |
Color | Black |
Compatible App | ScanMaster-ELM |
1.SAE J1850 PWM (41.6Kbaud)
2.SAE J1850 VPW (10.4Kbaud)
3.ISO9141-2(5 baud init, 10.4Kbaud)
4.ISO14230-4 KWP (5 baud init,10.4Kbaud)
5.ISO14230-4 KWP (fast init, 10.4 Kbaud)
6.ISO15765-4 CAN (11bit ID, 500 Kbaud)
7.ISO15765-4 CAN (29bit ID, 500 Kbaud)
8.ISO15765-4 CAN (11bit ID, 250 Kbaud)
9.ISO15765-4 CAN (29bit ID, 250 Kbaud)
1, Read engine fault codes, both generic and manufacturer-specific, and display their meaning.
2, Clear trouble codes and turn off the MIL ("Check Engine" light).
3, Display current sensor data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel Pressure and so on.
No | Pin Definition | Remark |
1 | B+ | Battery 12V output |
2 | VCC_5V | VCC_5V power supply |
3 | RxD | Signal Receiving |
4 | TxD | Signal Sending |
5 | GND | Earth wire |
3F, Block A1, Puhua High-Tech Park, Dalang, Longhua District, Shenzhen, Guangdong, China
+86 13418549260
+86 13418549260
live:.cid.6602b7a62aa148a2
Copyright © 2022 Fiberall Co., Ltd
OBD2 Code Reader OEM ODM Factory