PRODUCTS CENTER
Home » Products » Diagnostic Tool » OBD Auto Diagnostic Tool & Battery Tester Support Printer
Share to:

OBD Auto Diagnostic Tool & Battery Tester Support Printer

FA-V313 is a handheld comprehensive auto diagnostic tool integrate with both code reader, diagnostic scanner and battery tester in one equipment. It is with high definition display. This car diagnostic scan tool is for OBD and EOBD cars and it is able to read trouble code, show fault reason, erase fault code, view freeze frame data, detect I/M readiness status, check vehicle information, display waveform data, test battery, print and so on. Support DTC, BAT and I/M one click fast enquiry. This automobile diagnostic tool is universal for worldwide and it supports 6 language including German, Dutch, English, Spanish, French, and Italian.
Color:
Communication Way:
Working voltage:
Working current:
Quantity:
  • FA-V313
  • Fiberall

FA-V313 Comprehensive OBD Auto Diagnostic Tool & Battery Tester Support Printer

FA-V313 is a handheld comprehensive auto diagnostic tool integrate with both code reader, diagnostic scanner and battery tester in one equipment. It is with high definition display. This car diagnostic scan tool is for OBD and EOBD cars and it is able to read trouble code, show fault reason, erase fault code, view freeze frame data, detect I/M readiness status, check vehicle information, display waveform data, test battery, print and so on. Support DTC, BAT and I/M one click fast enquiry. This automobile diagnostic tool is universal for worldwide and it supports 6 language including German, Dutch, English, Spanish, French, and Italian. It is with OBD cable and fish clamp on the top and with USB interface at the bottom so it is able to realize car diagnosis (OBD), battery test (fish clamp), upgrade (USB), print (USB), data storage and playback (USB). It is with over-current and over-voltage protection function.

 

Main Functions of FA-V313 Auto Diagnostic Scanner & Vehicle Battery Tester:

1, OBD diagnostic function

Engine fault reading + fault cause analysis + engine fault lamp clearing (MIL)

2, View vehicle information

3, I/M ready status

4, Freeze frame data

5, Waveform display

6, Display current sensor data, including:

- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure

-Fuel consumption monitoring, etc

Note: the number of data items supported by different model years is also different, subject to the actual support.

 

7. Automobile battery detection

Battery detection of 12V automobile and motorcycle

Analysis of current battery status

Battery life

Residual electricity, etc

The cold start current, internal resistance, battery life and residual power of 12V start-up lead-acid battery are tested quickly to determine whether the battery needs to be replaced: real-time voltage detection, battery impedance detection, SOC remaining after a period of full charge (soh), cold start current detection (CCA);

 

Pin Definition of DB15 Male Connector:

PIN

Definition

PIN

Definition

1

J1850+

9

+

2

J1850-

10

+

3

ISO_L

11

+

4

ISO_K

12

-

5

CAN_L

13

-

6

CAN_H

14

-

7

12V_IN

15

+

8

GND



 

Product Parameters of V313 Auto Diagnostic Tool:

Model No.

FA-V313

Communication   Protocols (compatible with more than 95% vehicles equipped with OBD-II/EOBD   protocols)

1. SAE   J1850 PWM (41.6Kbaud)

2. SAE   J1850 VPW (10.4Kbaud)

3. ISO9141-2(5   baud init, 10.4Kbaud)

4. ISO14230-4   KWP (5 baud init, 10.4 Kbaud)

5. ISO14230-4   KWP (fast init, 10.4 Kbaud)

6. ISO15765-4   CAN (11bit ID, 500 Kbaud)

7. ISO15765-4   CAN (29bit ID, 500 Kbaud)

8. ISO15765-4   CAN (11bit ID, 250 Kbaud)

9. ISO15765-4   CAN (29bit ID, 250 Kbaud)

Working voltage

DC12V

Working   current

98mA

Working   temperature

-20℃~70℃

Storage   temperature

-20℃~80℃

Product   dimension

181.5mm*81mm*29mm

Color

Black/Grey

 

Packing List:

V313 Diagnostic Tool 1pc

Fish clamp cable 1pc

OBD cable 1pc

User manual 1pc

Tool bag 1pc

Cardboard box 1pc

V313 Auto Diagnostic Tool and Battery Tester

FIBERALL TECHNOLOGY CO., LTD

3F, Huayang Bldg., Minwang Rd., Minzhi Sub-district, Longhua New Dist., Shenzhen, Guangdong, China

fiberallobd

+86 13418549260

+86 13418549260

QUICK LINK

PRODUCTS CATEGORY

FOLLOW US

SUBSCRIPTION

Copyright © 2020 Fiberall Technology (Shenzhen) Co., Ltd

OBD Code Reader OEM ODM Factory