 |
| Quantity: | |
|---|---|
VP003
Fiberall
1, Master chip of the diagnostic scan tool is original imported 25K80 high performance chip;
2, Supports 9 OBD-II/EOBD standard communication protocols;
3, The obd2 scan tool supports wide power supply voltage range: 9~36V;
4, With reliable overcurrent and overvoltage protection function;
5, With low power consumption standby sleep mode, which ensures safe use of battery;
6, With digital tube to display voltage, current, enhance customer experience;
7, Mobile phone visual App interface, and we provide free App;
8, Segmented interface, compatible with more models.
1, Read fault code.
2, Clear trouble codes and turn off the MIL ("Check Engine" light).
3, Display current sensor data, including:
- Engine RPM (speed per minute)
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel Pressure
- Fuel consumption monitoring, etc.
Note: Supported data depends on App configuration and vehicle model. If you cannot check the listed data during operation, it is not the problem of vehicle scan tool.
1, Preparation for computer connection:
This step need to use computer, VP003 elm327 scan tool, type-c USB cable, and software Scan Mater-ELM. The software is available on our website.
2, Operation steps：
First insert VP003 OBD2 scan tool to the vehicle. Then connect the type-c USB cable to the obd scan tool and the computer. After that, open serial port setting on the computer. Open the Scan Mater-ELM software on the computer. Click the link to select the serial port and confirm, click to connect, complete device link communication.
Part Number | VP003 |
Communication way | Bluetooth Or Type-C |
Compatible OS | Android / iOS / Windows |
Master Chip | PIC18F25K80 |
Communication Protocols (compatible with more than 95% vehicles equipped with OBD-II protocols) | 1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) |
Working voltage | 9-36V |
Working current | 40mA |
Standby current | 5mA |
Working temperature | -20℃~65℃ |
Storage temperature | -40℃~80℃ |
Color | Black/Grey/Blue |
1, This obd scan tool is with brand name on the case;
2, We provide odm service for the elm327 scan tool;
3, There is no type-C USB cable with the package of the vehicle scan tool, please prepare it if you need to use it. We will improve this in the future when we have suitable supplier for the type-C USB cable.
1, Master chip of the diagnostic scan tool is original imported 25K80 high performance chip;
2, Supports 9 OBD-II/EOBD standard communication protocols;
3, The obd2 scan tool supports wide power supply voltage range: 9~36V;
4, With reliable overcurrent and overvoltage protection function;
5, With low power consumption standby sleep mode, which ensures safe use of battery;
6, With digital tube to display voltage, current, enhance customer experience;
7, Mobile phone visual App interface, and we provide free App;
8, Segmented interface, compatible with more models.
1, Read fault code.
2, Clear trouble codes and turn off the MIL ("Check Engine" light).
3, Display current sensor data, including:
- Engine RPM (speed per minute)
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel Pressure
- Fuel consumption monitoring, etc.
Note: Supported data depends on App configuration and vehicle model. If you cannot check the listed data during operation, it is not the problem of vehicle scan tool.
1, Preparation for computer connection:
This step need to use computer, VP003 elm327 scan tool, type-c USB cable, and software Scan Mater-ELM. The software is available on our website.
2, Operation steps：
First insert VP003 OBD2 scan tool to the vehicle. Then connect the type-c USB cable to the obd scan tool and the computer. After that, open serial port setting on the computer. Open the Scan Mater-ELM software on the computer. Click the link to select the serial port and confirm, click to connect, complete device link communication.
Part Number | VP003 |
Communication way | Bluetooth Or Type-C |
Compatible OS | Android / iOS / Windows |
Master Chip | PIC18F25K80 |
Communication Protocols (compatible with more than 95% vehicles equipped with OBD-II protocols) | 1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) |
Working voltage | 9-36V |
Working current | 40mA |
Standby current | 5mA |
Working temperature | -20℃~65℃ |
Storage temperature | -40℃~80℃ |
Color | Black/Grey/Blue |
1, This obd scan tool is with brand name on the case;
2, We provide odm service for the elm327 scan tool;
3, There is no type-C USB cable with the package of the vehicle scan tool, please prepare it if you need to use it. We will improve this in the future when we have suitable supplier for the type-C USB cable.
