Availability: | |
---|---|
Quantity: | |
VP004
Viecar
1, With Original 25K80 high performance chip;
2, Supports 9 OBD-II/EOBD standard protocols;
3, Compatible with wide power supply range: 9~36V;
4, With reliable overcurrent and overvoltage protection function;
5, Supports low power consumption standby sleep mode, which ensures safe use of battery;
6, With digital tube to display voltage, current, enhance customer experience;
7, Mobile phone visual App interface, display trouble code and real time data;
8, Segmented interface, compatible with more models.
1, Diagnosis engine fault (DTC code).
2, Clear trouble codes and turn off the MIL ("Check Engine" light).
3, Display current sensor data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel Pressure and so on.
- Fuel consumption monitoring, etc
Note: Supported data number depends on configuration of App and vehicle model.
Part Number | VP004 |
Communication way | WiFi Or Type-C (USB 2.0) |
Compatible OS | Android / iOS / Windows |
Master Chip | PIC18F25K80 |
Communication Protocols (compatible with more than 95% vehicles equipped with OBD-II protocols) | 1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) |
Working voltage | 9-36V |
Operation current | 40mA |
Standby current | 5mA |
Working temperature | -20℃~65℃ |
Storage temperature | -40℃~80℃ |
Color | Black/Grey/Orange |
No. | Part No. | Name and Descriptions |
1 | VP001 | Bluetooth Automotive Scan Tool and OBD Diagnostic Detector |
2 | VP002 | WiFi OBD2 EOBD Automobile Diagnostic Scan Tool |
3 | VP003 | Bluetooth Type-C ELM327 OBD2 Vehicle Diagnostic Scan Tool |
4 | VP004 | Multiconnection WiFi Type-C Automotive OBD2 Scan Tool |
5 | VP005 | Bluetooth 4.0 5.0 OBD Vehicle Engine Scan Tool |
6 | VP006 | New Design WiFi Automobile OBD Scan Tool |
1, Use WiFi or USB2.0 cable to connect with the computer
2, Cable required: Type-C serial cable. One end is with USB 2.0 interface and the other end is type-C.
3, Computer software: Scan Mater-ELM ( available on our website or CD enclosed with the scan tool).
4, Operation Steps:
A, Install Scan Mater-ELM on the computer;
B, Insert VP004 OBD2 scan tool to the obd socket of the vehicle;
B, Connect type-c cable with the scan tool;
C, Connect the USB 2.0 end of the cable to the computer;
D, Open the serial port setting on computer;
E, Open the Scan Mater-ELM software;
F, Click the link to select the serial port and confirm, click to connect, complete device link communication.
Note: Before insert the OBD2 scan tool into the vehicle, please keep sure the ignition is off. And after connecting the automotive scan tool with the vehicle, it requires the ignition is on.
1, With Original 25K80 high performance chip;
2, Supports 9 OBD-II/EOBD standard protocols;
3, Compatible with wide power supply range: 9~36V;
4, With reliable overcurrent and overvoltage protection function;
5, Supports low power consumption standby sleep mode, which ensures safe use of battery;
6, With digital tube to display voltage, current, enhance customer experience;
7, Mobile phone visual App interface, display trouble code and real time data;
8, Segmented interface, compatible with more models.
1, Diagnosis engine fault (DTC code).
2, Clear trouble codes and turn off the MIL ("Check Engine" light).
3, Display current sensor data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel Pressure and so on.
- Fuel consumption monitoring, etc
Note: Supported data number depends on configuration of App and vehicle model.
Part Number | VP004 |
Communication way | WiFi Or Type-C (USB 2.0) |
Compatible OS | Android / iOS / Windows |
Master Chip | PIC18F25K80 |
Communication Protocols (compatible with more than 95% vehicles equipped with OBD-II protocols) | 1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) |
Working voltage | 9-36V |
Operation current | 40mA |
Standby current | 5mA |
Working temperature | -20℃~65℃ |
Storage temperature | -40℃~80℃ |
Color | Black/Grey/Orange |
No. | Part No. | Name and Descriptions |
1 | VP001 | Bluetooth Automotive Scan Tool and OBD Diagnostic Detector |
2 | VP002 | WiFi OBD2 EOBD Automobile Diagnostic Scan Tool |
3 | VP003 | Bluetooth Type-C ELM327 OBD2 Vehicle Diagnostic Scan Tool |
4 | VP004 | Multiconnection WiFi Type-C Automotive OBD2 Scan Tool |
5 | VP005 | Bluetooth 4.0 5.0 OBD Vehicle Engine Scan Tool |
6 | VP006 | New Design WiFi Automobile OBD Scan Tool |
1, Use WiFi or USB2.0 cable to connect with the computer
2, Cable required: Type-C serial cable. One end is with USB 2.0 interface and the other end is type-C.
3, Computer software: Scan Mater-ELM ( available on our website or CD enclosed with the scan tool).
4, Operation Steps:
A, Install Scan Mater-ELM on the computer;
B, Insert VP004 OBD2 scan tool to the obd socket of the vehicle;
B, Connect type-c cable with the scan tool;
C, Connect the USB 2.0 end of the cable to the computer;
D, Open the serial port setting on computer;
E, Open the Scan Mater-ELM software;
F, Click the link to select the serial port and confirm, click to connect, complete device link communication.
Note: Before insert the OBD2 scan tool into the vehicle, please keep sure the ignition is off. And after connecting the automotive scan tool with the vehicle, it requires the ignition is on.
content is empty!
3F, Block A1, Puhua High-Tech Park, Dalang, Longhua District, Shenzhen, Guangdong, China
+86 13418549260
+86 13418549260
live:.cid.6602b7a62aa148a2
Copyright © 2022 Fiberall Co., Ltd
OBD2 Code Reader OEM ODM Factory